Development of a Rainbow Trout (Oncorhynchus mykiss) Intestinal In Vitro Platform for Profiling Amino Acid Digestion and Absorption of a Complete Diet.

The ever-increasing number and variation of raw materials utilized to provide alternative feed formulations continues to allow for a more sustainable and flexible approach. Testing all these options in vivo is still the most robust and reliable manner to pick the best raw material candidates, but it requires the use of large numbers of animals and is time-consuming and expensive. Therefore, we are developing an in vitro platform that can provide a reliable evaluation of new ingredients. The main aim of this work was to combine an in vitro digestion protocol of extruded, commercially relevant aquafeeds with the exposure of intestinal epithelial cells to the extracted bio-available fraction (BAF). The results show that 250,000 cells/cm2 represents the optimal seeding density and that up to 50% BAF concentration for up to 24 h had no negative effects on the epithelial barrier morphology and function. It is possible to determine amino acid digestibility and bioavailability in all the experimental conditions (with and without BSA, at 25% and 50% dilution) and at all time points (0, 6, and 24 h). However, BAF concentration, the medium used for its dilution, and the length of exposure to the different epithelial cell lines can all influence the results and, therefore, must be selected according to the final aim of the experiment.

Distinct Organotypic Platforms Modulate Rainbow Trout (Oncorhynchus mykiss) Intestinal Cell Differentiation In Vitro.

In vitro organotypic cell-based intestinal platforms, able to faithfully recapitulate the complex functions of the organ in vivo, would be a great support to search for more sustainable feed ingredients in aquaculture. We previously demonstrated that proliferation or differentiation of rainbow trout intestinal cell lines is dictated by the culture environment. The aim of the present work was to develop a culture platform that can efficiently promote cell differentiation into mature enterocytes. We compared four options, seeding the RTpiMI cell line derived from the proximal intestine on (1) polyethylene terephthalate (PET) culture inserts ThinCert™ (TC), (2) TC coated with the solubilized basement membrane matrix Matrigel® (MM), (3) TC with the rainbow trout fibroblast cell line RTskin01 embedded within the Matrigel® matrix (MMfb), or (4) the highly porous polystyrene scaffold Alvetex® populated with the abovementioned fibroblast cell line (AV). We evaluated the presence of columnar cells with a clear polarization of brush border enzymes, the formation of an efficient barrier with a significant increase in transepithelial electrical resistance (TEER), and its ability to prevent the paracellular flux of large molecules but allow the transit of small compounds (proline and glucose) from the apical to the basolateral compartment. All parameters improved moving from the simplest (TC) through the more complex platforms. The presence of fibroblasts was particularly effective in enhancing epithelial cell differentiation within the AV platform recreating more closely the complexity of the intestinal mucosa, including the presence of extracellular vesicles between fibroblasts and epithelial cells.

Characterization of Beef Coming from Different European Countries through Stable Isotope (H, C, N, and S) Ratio Analysis.

The need to guarantee the geographical origin of food samples has become imperative in recent years due to the increasing amount of food fraud. Stable isotope ratio analysis permits the characterization and origin control of foodstuffs, thanks to its capability to discriminate between products having different geographical origins and derived from different production systems. The Framework 6 EU-project "TRACE" generated hydrogen (2H/1H), carbon (13C/12C), nitrogen (15N/14N), and sulphur (34S/32S) isotope ratio data from 227 authentic beef samples. These samples were collected from a total of 13 sites in eight countries. The stable isotope analysis was completed by combining IRMS with a thermal conversion elemental analyzer (TC/EA) for the analysis of δ(2H) and an elemental analyzer (EA) for the determination of δ(13C), δ(15N), and δ(34S). The results show the potential of this technique to detect clustering of samples due to specific environmental conditions in the areas where the beef cattle were reared. Stable isotope measurements highlighted statistical differences between coastal and inland regions, production sites at different latitudes, regions with different geology, and different farming systems related to the diet the animals were consuming (primarily C3- or C4-based or a mixed one).

Fatty Acid and Multi-Isotopic Analysis (C, H, N, O) as a Tool to Differentiate and Valorise the Djebel Lamb from the Mountainous Region of Tunisia.

The objective of this study was to distinguish between the Tunisian Djebel lamb meat and meat from typical Tunisian production systems (PSs) through the fatty acids (FAs) profile and the stable isotope ratio analysis (SIRA). Thirty-five lambs from three different regions and PSs (D = Djebel, B = Bou-Rebiaa, and O = Ouesslatia) were considered for this purpose. The results demonstrated that the PS and the geographic origin strongly influenced the FA profile of lamb meat. It was possible to discriminate between the Djebel lamb meat and the rest of the dataset thanks to the quantification of the conjugated linoleic acids (CLA) and the branched chain FAs. Moreover, statistically different concentrations of saturated, monounsaturated and polyunsaturated FAs and a different n-6/n-3 ratio were found for grazing (D and BR) and indoor (O) lambs, making it possible to discriminate between them. As for the stable isotope ratio analysis, all parameters made it possible to distinguish among the three groups, primarily on the basis of the dietary regimen (δ(13C) and δ(15N)) and breeding area (δ(18O) and δ(2H)).

Insights into the stable isotope ratio variability of hybrid grape varieties: a preliminary study.

BACKGROUND: Official stable isotope databases, based on the analysis of (D/H)I ethanol , (D/H)II ethanol , δ13 Cethanol and δ18 Owater of wine, are an indispensable tool for establishing the limits beyond which the mislabeling or the addition of sugar and/or water in wine production can be detected. The present study investigates, for the first time, whether the use of hybrid varieties instead of European Vitis vinifera for wine production can have an impact on the stable isotope ratios. RESULTS: The analyses were performed by isotope ratio mass spectrometry and site-specific natural isotope fractionation by nuclear magnetic resonance, in accordance with the official methods of the International Organization of Grapes and Wine. The comparison shows the tendency of some stable isotope ratios of hybrid varieties, in particular (D/H)I , to deviate from the regional averages of the V. vinifera samples. Notably, Baron, Monarch and Regent showed significantly different values at one of the two sampling sites. Particularly high δ13 C values characterize Helios compared to other hybrid varieties. CONCLUSION: For the first time, and from an isotopic point of view, the present study investigates the wine obtained from hybrid varieties, showing that further attention should be paid to their interpretation, on the basis of the database established according to the European Regulation 2018/273. © 2022 Society of Chemical Industry.

Nuclear magnetic resonance spectroscopy in extra virgin olive oil authentication.

Extra virgin olive oil (EVOO) is a high-quality product that has become one of the stars in the food fraud context in recent years. EVOO can encounter different types of fraud, from adulteration with cheaper oils to mislabeling, and for this reason, the assessment of its authenticity and traceability can be challenging. There are several officially recognized analytical methods for its authentication, but they are not able to unambiguously trace the geographical and botanical origin of EVOOs. The application of nuclear magnetic resonance (NMR) spectroscopy to EVOO is reviewed here as a reliable and rapid tool to verify different aspects of its adulteration, such as undeclared blends with cheaper oils and cultivar and geographical origin mislabeling. This technique makes it possible to use both targeted and untargeted approaches and to determine the olive oil metabolomic profile and the quantification of its constituents.

The Hierarchical Contribution of Organic vs. Conventional Farming, Cultivar, and Terroir on Untargeted Metabolomics Phytochemical Profile and Functional Traits of Tomato Fruits.

In this work, the impact of terroir, cultivar, seasonality, and farming systems on functional traits of tomato was hierarchically investigated. Untargeted metabolomics, antioxidant capacity, colorimetric assays, and enzyme inhibition were determined. The total phenolic and carotenoid contents significantly varied between growing years, whereas an interaction between the farming system and growing year (p < 0.01) was observed for total phenolics, carotenoids, and flavonoids, and for acetylcholinesterase inhibition. Hierarchical clustering showed that geographical origin and growing year were the major contributors to the differences in phytochemical profiles. Nonetheless, supervised modeling allowed highlighting the effect of the farming system. Several antioxidants (L-ascorbic acid, α-tocopherol, and 7,3',4'-trihydroxyflavone) decreased, whereas the alkaloid emetine and phytoalexin phenolics increased under organic farming. Taken together, our findings indicate that cultivar and pedo-climatic conditions are the main determinants for the functional quality of tomato, whereas the farming system plays a detectable but hierarchically lower.

Simultaneous evaluation of the enantiomeric and carbon isotopic ratios of Cannabis sativa L. essential oils by multidimensional gas chromatography.

Recent times have witnessed an upsurge of interest in hemp and hemp-derived products, as driven by the scientific findings specific to the pharmacological properties of Cannabis sativa L. and its constituents. There has been evidence that the terpene profile, along with the cannabinoid content, produces in humans the effects associated with different strains, beyond fragrance perception. A great deal of effort has been put into developing analytical approaches to strengthen the scientific knowledge on cannabis essential oil composition and provide effective tools for ascertaining the authenticity of commercial cannabis samples. For this concern, enantio-selective-GC-C-IRMS has proven to be effective for assessing the ranges characteristic of the genuine samples and detecting any fraudulent additions. This research aimed at providing for the first time the enantiomeric and isotopic ratios of target terpenes in cannabis essential oils, obtained from microwave-assisted hydro-distillation from the fresh and dried inflorescences of different cannabis varieties. Implementing multidimensional gas chromatography separation was mandatory prior to detection, in order to obtain accurate δ13C values and enantiomeric data from completely separated peaks. For this purpose, a heart-cut method was developed, based on the coupling of an apolar first dimension column to a secondary chiral cyclodextrin-based stationary phase. Afterwards, the data gathered from enantio-selective-MDGC-C-IRMS/qMS analysis of a set of genuine samples were used to evaluate the quality of nineteen commercial cannabis essential oils purchased from local stores. Remarkably, the data in some cases evidenced enantiomeric ratios and δ13C values outside the typical ranges of genuine oils. Such findings suggest the usefulness of the method developed to ascertain the genuineness and quality of cannabis essential oils.

Natural variation in stomatal dynamics drives divergence in heat stress tolerance and contributes to seasonal intrinsic water-use efficiency in Vitis vinifera (subsp. sativa and sylvestris).

Stomata control CO2 uptake for photosynthesis and water loss through transpiration, thus playing a key role in leaf thermoregulation, water-use efficiency (iWUE), and plant productivity. In this work, we investigated the relationship between several leaf traits and hypothesized that stomatal behavior to fast (i.e. minutes) environmental changes co-determines, along with steady-state traits, the physiological response of grapevine to the surrounding fluctuating environment over the growing season. No relationship between iWUE, heat stress tolerance, and stomatal traits was observed in field-grown grapevine, suggesting that other physiological mechanisms are involved in determining leaf evaporative cooling capacity and the seasonal ratio of CO2 uptake (A) to stomatal conductance (gs). Indeed, cultivars that in the field had an unexpected combination of high iWUE but low sensitivity to thermal stress displayed a quick stomatal closure to light, but a sluggish closure to increased vapor pressure deficit (VPD) levels. This strategy, aiming both at conserving water under a high to low light transition and in prioritizing evaporative cooling under a low to high VPD transition, was mainly observed in the cultivars Regina and Syrah. Moreover, cultivars with different known responses to soil moisture deficit or high air VPD (isohydric versus anisohydric) had opposite behavior under fluctuating environments, with the isohydric cultivar showing slow stomatal closure to reduced light intensity but quick temporal responses to VPD manipulation. We propose that stomatal behavior to fast environmental fluctuations can play a critical role in leaf thermoregulation and water conservation under natural field conditions in grapevine.

Investigations on historical monuments' deterioration through chemical and isotopic analyses: an Italian case study.

In this paper, we analysed the efflorescences present in the frescos of a monumental complex named S. Pietro a Corte situated in the historic centre of Salerno (Campania, Italy). The groundwater of the historic centre is fed by two important streams (the Rafastia and the Fusandola) that can be the sources of water penetration. The aims of this work are to (i) identify the stream that reaches the ancient frigidarium of S. Pietro a Corte and (ii) characterize the efflorescences on damaged frescos in terms of chemical nature and sources. In order to accomplish the first aim, the water of the Rafastia river (7 samples) and the water of the Fusandola river (7 samples) were analysed and compared with the water of a well of the Church (7 samples). The ionic chromatography measurements on the water samples allowed us to identify the Rafastia as the river that feeds the ancient frigidarium of S. Pietro a Corte. To investigate the nature and the origin of the efflorescences (our second aim), anionic chromatography analyses, X-ray diffraction measurements, and the isotopic determination of nitrogen were performed on the efflorescences (9 samples) and the salts recovered from the well (6 samples). Results of these analyses show that efflorescences are mainly made of potassium nitrate with a δ15N value of + 9.3 ± 0.2‰. Consequently, a plausible explanation for their formation could be the permeation of sewage water on the walls of the monumental complex.

Application of 13C Quantitative NMR Spectroscopy to Isotopic Analyses for Vanillin Authentication Source.

The carbon stable isotope ratio (δ13C) is a valuable chemical parameter in the investigation of the geographic origin, quality, and authenticity of foods. The aim of this study is the evaluation of the feasibility of 13C-NMR (Nuclear Magnetic Resonance) spectroscopy to determine the carbon stable isotope ratio, at natural abundance, of small organic molecules, such as vanillin, without the use of IRMS (Isotope Ratio Mass Spectrometry). The determination of vanillin origin is an active task of research, and differentiating between its natural and artificial forms is important to guarantee the quality of food products. To reach our goal, nine vanillin samples were analyzed using both 13C quantitative NMR spectroscopy (under optimized experimental conditions) and IRMS, and the obtained δ13C values were compared using statistical analysis (linear regression, Bland-Altman plot, and ANOVA (analysis of variance)). The results of our study show that 13C-NMR spectroscopy can be used as a valuable alternative methodology to determine the bulk carbon isotope ratio and to identify the origin of vanillin. This makes it attractive for the analysis in the same experiment of site-specific and total isotope effects for testing authenticity, quality, and typicality of food samples. Moreover, the improvement of NMR spectroscopy makes it possible to avoid the influence of additives on carbon stable isotope ratio analysis and to clearly identify fraud and falsification in commercial samples.

Stable Isotope Ratios of Herbs and Spices Commonly Used as Herbal Infusions in the Italian Market.

Stable isotope ratio analysis has been widely used for traceability and authenticity purposes in relation to various food commodities, but only in a limited number of herb and spice species. This study explored the stable isotope ratios of carbon, nitrogen, sulfur, oxygen, and hydrogen (δ13C, δ15N, δ34S, δ18O, and δ2H) of 119 herbs and spices belonging to 116 plant species and 57 plant families collected from the Italian market for the first time. The characteristic value ranges of δ13C, δ15N, δ34S, δ18O, and δ2H of the herbs and spices went from -31.0 to -11.6, -4.7 to 12.0, -5.0 to 22.0, 14.7 to 46.0, and -158 to -12‰, respectively. The isotopic profiles within and between common botanical families and their similarity/dissimilarity between herbs and spices belonging to the common botanical families are also discussed here. The results of this exploratory work highlight the possibility of characterizing herbs and spices and suggest widening the scope of the survey through more extensive sampling and focusing on specific plant species.

Evaluation of honey authenticity in Lebanon by analysis of carbon stable isotope ratio using elemental analyzer and liquid chromatography coupled to isotope ratio mass spectrometry.

Honey is one of the most valuable sweeteners consumed by humans all over the world. Consequently, it is often a target for adulteration through the addition of different sugar syrups during or after honey production, resulting in a reduction in its nutritive value. For the first time, this study analyzes honey samples of various botanical species collected from different Lebanese regions using element analyzer (EA) and liquid chromatography (LC) coupled with isotope ratio mass spectrometry (IRMS). The δ13 C of bulk honey, its protein fraction, and the main individual sugars (glucose, fructose, disaccharides, and trisaccharide) were determined, in order to characterize and evaluate the authenticity of honey consumed in Lebanon. The results showed that the δ13 C values for bulk honey and its protein range from -26.5‰ to -24.5‰ and from -26.4‰ to -24.7‰, respectively, for authentic samples. δ13 C values for samples adulterated with sugar syrups range from -11.2‰ to -25.1‰ for bulk honey and from -26.6‰ to -23.7‰ for its proteins, with a difference between bulk and protein values between -1 and -8.7‰. Using LC-C-IRMS techniques, the δ13 C of individual sugars provides additional information on the presence of undeclared sugars. We found that all authentic samples had Δδ13 Cf-g and Δδ13 C max values within the naturally occurring range of ±1‰ and ±2.1‰, respectively, while the adulterated samples fall outside the Δδ13 C ranges. The oligosaccharide peak was detected in most adulterated samples.

Using Bioelements Isotope Ratios and Fatty Acid Composition to Deduce Beef Origin and Zebu Feeding Regime in Cameroon.

The purpose of this study was to address the lack of knowledge regarding the stable isotopic composition of beef from zebu cattle reared in tropical Africa. Sixty beef carcasses belonging to the most common zebu breeds (Goudali, white Fulani, and red Mbororo) were selected and classified according to their subcutaneous fat color (white, cream or yellow). The stable isotope ratios of five bioelements-H, O, C, N, and S-in muscle fractions and the fatty acids composition were analyzed. Zebu meat from Cameroon shows peculiar δ13C values, related to the almost exclusive intake of grazed tropical grasses with photosynthetic cycle C4. It also shows δ2H and δ18O values higher than those reported in other areas of the world and correlated with the isotopic composition of animal drinking water. The white subcutaneous fat ("white type") zebu showed higher δ2H and lower δ13C than the "yellow type", that is correlated with a higher content of polyunsaturated fatty acid (PUFA) and a lower amount of saturated fatty acid (SFA) and monounsaturated fatty acid (MUFA). Multielement analysis seems to provide promising results for tracing the regional origin of Cameroon beef and some aspects of the livestock system, such as the nutritional status of the animals.

Fatty acids stable carbon isotope fractionation in the bovine organism. A compound-specific isotope analysis through gas chromatography combustion isotope ratio mass spectrometry.

The contribution of dietary fatty acids to the quality of the meat and their path through the bovine organism is currently the subject of a lot of research. Stable isotope ratio analysis represents a powerful tool for this aim, one that has not been studied in depth yet. In this work, for the first time, the carbon isotopic ratios of six fatty acids (myristic 14:0, palmitic 16:0, stearic 18:0, oleic 18:1n-9, linoleic 18:2n-6 and linolenic 18:3n-3 acids) in different matrixes (diet, rumen, duodenal content, liver and loin) were analysed through gas chromatography combustion isotope ratio mass spectrometry. Moreover, the quantification of the single fatty acids was carried out, providing important information supporting the carbon isotopic ratio results. The variation in the concentration of the fatty acids in the different matrices depends on the chemical modifications they undergo in the sequential steps of the metabolic path. GC-C-IRMS turned out to be a powerful tool to investigate the fate of dietary fatty acids, providing information about the processes they undergo inside the bovine organism.

NMR spectroscopy in wine authentication: An official control perspective.

Wine authentication is vital in identifying malpractice and fraud, and various physical and chemical analytical techniques have been employed for this purpose. Besides wet chemistry, these include chromatography, isotopic ratio mass spectrometry, optical spectroscopy, and nuclear magnetic resonance (NMR) spectroscopy, which have been applied in recent years in combination with chemometric approaches. For many years, 2 H NMR spectroscopy was the method of choice and achieved official recognition in the detection of sugar addition to grape products. Recently, 1 H NMR spectroscopy, a simpler and faster method (in terms of sample preparation), has gathered more and more attention in wine analysis, even if it still lacks official recognition. This technique makes targeted quantitative determination of wine ingredients and nontargeted detection of the metabolomic fingerprint of a wine sample possible. This review summarizes the possibilities and limitations of 1 H NMR spectroscopy in analytical wine authentication, by reviewing its applications as reported in the literature. Examples of commercial and open-source solutions combining NMR spectroscopy and chemometrics are also examined herein, together with its opportunities of becoming an official method.

A pilot study of eDNA metabarcoding to estimate plant biodiversity by an alpine glacier core (Adamello glacier, North Italy).

Current biodiversity loss is a major concern and thus biodiversity assessment of modern ecosystems is compelling and needs to be contextualized on a longer timescale. High Throughput Sequencing (HTS) is progressively becoming a major source of data on biodiversity time series. In this multi proxy study, we tested, for the first time, the potential of HTS to estimate plant biodiversity archived in the surface layers of a temperate alpine glacier, amplifying the trnL barcode for vascular plants from eDNA of firn samples. A 573 cm long core was drilled by the Adamello glacier and cut into sections; produced samples were analyzed for physical properties, stable isotope ratio, and plant biodiversity by eDNA metabarcoding and conventional light microscopy analysis. Results highlighted the presence of pollen and plant remains within the distinct layers of snow, firn and ice. While stable isotope ratio showed a scarcely informative pattern, DNA metabarcoding described distinct plant species composition among the different samples, with a broad taxonomic representation of the biodiversity of the catchment area and a high-ranking resolution. New knowledge on climate and plant biodiversity changes of large catchment areas can be obtained by this novel approach, relevant for future estimates of climate change effects.

Characterization of L-theanine in tea extracts and synthetic products using stable isotope ratio analysis.

L-theanine involves a great number of health benefits and dietary supplements containing this molecule are becoming increasingly popular. There is, therefore, a growing need to find ways to discriminate between natural L-theanine extracted from tea leaves and the cheaper, synthetic one obtained using specific bacterial enzymes. A first attempt of stable isotope ratio analysis characterization of the possible synthetic adulterant L-theanine (δ13C of -14.3 ± 1.5‰), obtained from vegetable substrates with C4 photosynthetic cycle, and of the more expensive natural L-theanine (δ13C of -24.4 ± 1.3‰), extracted from Camellia sinensis plants with C3 photosynthetic cycle, is reported here.

Characterization and authentication of commercial cleaning products formulated with biobased surfactants by stable carbon isotope ratio.

This study focuses on the application of stable carbon isotope analysis to determine the origin of commercial surfactants and cleaning products, especially used in quality process by chemical companies. The δ13C value was applied to commercial surfactants, such as ethoxylate alcohol, sodium lauryl sulfate, alkyl polyglucoside with different origin, that are the most common raw materials used in cleaning products. In this study, the isotopic analysis was performed on mixtures of commercial surfactants to simulate the commercial detergent formulations (handwashing, multisurface cleaner and degreaser) and then on bulk professional cleaning products to match relationship between isotope carbon composition and concentration of surfactants in real samples. This study demonstrated that δ13C was correlated to the origin of surfactants. In particular we analyzed five samples of biobased surfactants, with δ13C value from -22,6‰ to -28,0‰, and six samples from carbon fossil raw material, with δ13C value from -28,5‰ to -32,0‰, which were the most common raw material used in commercial cleaning products. Isotope carbon composition was also applied on mixtures of biobased and fossil surfactants to simulate and perform the method for stable carbon isotope analysis of commercial cleaning products. Furthemore the results assessed the relationship between stable carbon isotope ratio values and surfactant concentration in mixtures: for example in 50% mixtures of biobased (δ13C -22,6‰) and synthetic surfactant (δ13C -32,5‰), we found a δ13C value -28,00‰. The main advantage in using δ13C analysis is related to cheapness and easy-to-operate method in comparison to radiocarbon methodology.